Specs
Utilizing micro-thin, genuine paulownia wood on a paper backing, Ajiro™ is so flexible it can wrap columns and even turn corners. Creates a wood veneer wall that is a beautiful, cost-effective and environmentally sound alternative to traditional wood surfacing materials. Made from farmed, fast-renewing wood. Design has a seamless side match. Custom colors available.
Installation
| PLEASE! |
| Do not install until you have read the instructions. Call 800.465.6909 with any questions. |
|
Download complete Installation Instructions here: |
Care & Cleaning
| STOP! |
| Do not install until you have read these instructions. Call 800.465.6909 with any questions. |
|
CARE AND CLEANING INSTRUCTIONS FOR |
| CLEANING |
|
| CARE |
*Polyurethane can be applied to some of our products after installation to improve our products' retained beauty over time through increased resistance to occasional or light moisture. This coating is NOT a guarantee of waterproofing. We reccomend testing first on a small, inconspicuous area. Maya Romanoff is not responsible for unsatisfactory results. If a product requires more specific care and cleaning instructions, it will be noted on the product-specific installation instructions. Installation instructions come wrapped with every roll of shipped wallcovering and can also be downloaded from our website. 05/01/11 |
More Information
| INSTRUCTIONS FOR SEMI-WET AREAS & ADDITIONAL PROTECTIVE COATINGS |
![]() |
A thin layer of water-based polyurethane may be applied to the installed wallcovering 48 hours after product installation. This will form a barrier coat and help prevent moisture from penetrating the wood inlay. We recommend Low-Luster Benwood Acrylic Polyurethane*, a superior Benjamin Moore® product. The sheen of the Low Luster on top of the factory finish is very similar to that of the original factory finish. If a glossy finish is desired, you may elect to use the High-Gloss Benwood Acrylic Polyurethane**. Do not apply polyurethane to wet product or uninstalled product. Download complete Installation Instructions here: Ajiro Chevron™ (MR-AC series) |
|
* Purchase from www.benjaminmoore.com or a high-grade paint store. |
|
** Please note: If you wish to apply an additional protective coating, such as a water-based polyurethane, always perform a test on scrap material before applying to the installed surface. Please consult the polyurethane manufacturer's application guidelines and be cognizant of yellowing. Maya Romanoff is not responsible for unsatisfactory results. |
|
Maya Romanoff wallcovering materials are primarily formulated for dry-use areas. The above guidelines should be taken as suggestions to improve our products' retained beauty over time through increased resistance to occasional or light moisture, such as sink backsplashes, NOT as a guarantee of water-proofing. |















